Restore IMEI
To Restore your IMEI number follow the following steps :
For All : Micromax, Karbonn, ZTE, Huawei, Dogee, All Samsung Clones, All iPhone Clones and all MTK Devices
STEPS :
Turn Off your phone remove the battery and at the back you will find your IMEI number copy it somewhere
Turn Off your phone remove the battery and at the back you will find your IMEI number copy it somewhere
Now Turn On your phone Connect your Phone with USB debugging ON
In MTK Droid Tools if there is a ROOT button then press it if not that is fine too
Now Click On IMEI/NVRAM Button
In the IMEI 1and IMEI 2 Type the IMEI Number which you copied Before in it.
Press Replace IMEI and Press OK press OK again
Now Reboot Your Device Whola your IMEI is Back
In Case If You Still Don't get your IMEI back it means your Phone's sec_ro or ser_co has been replaced.
TO GET IT BACK FOLLOW THE STEPS
You Must have your stock SP Flashable ROM of your device or find it online
Open SP Flash Tool Connect your device load the SP Flashable scatter file
Uncheck all the options
Only check the file sec_ro or ser_co
Now Press download
Whola ! Your IMEI is Back
How To Restore IMEI On Any Mediatek Device
Reviewed by MTK Hacker Pro
on
9:00 PM
Rating:
Sir i need your help
ReplyDeletewhat
DeleteHi, I've been trying to fix the IMEI on my Zopo 980+ with no luck. I've flashed stock ROM and it boots but there is no IMEI and no baseband. I've tried mktools but get the error ERROR :pttycmd1 device NOT found!
ReplyDeleteAny ideas how to fix this?
read the post completely you will find the solution
Deletei followed the post to get back my imei but when i click ondownload nothing happen.my phone is tecno phantom z mini.battery can't be removed
ReplyDeleteyou need to turn off your phone then press download in sp flash tool and then connect your phone to pc without turning it on
DeleteHelp it always shows a result like this
ReplyDelete--->>> Connect to device <<<---
--- ERROR :dev/radio/pttycmd1 inaccessible , should be Root Shell
--- ERROR :pttycmd1 device NOT found!
--- ERROR :dev/radio/pttycmd1 inaccessible , should be Root Shell
--- ERROR :pttycmd1 device NOT found!
--- task is complete ---
in Tutorials section of this website there is guide to fix MTK droid tools root issues
DeleteMTK tools doesn't detect my phone.
ReplyDeleteMy phone is micromax unite 2
you need to install proper device drivers
DeleteSir, i have restore my imei numbers, there's imei number in about phone/status. But there state invalid imei. I can use internet mobile network, but not phone call. Any solution sir? Please.
ReplyDeleteSir, i have restore my imei numbers, there's imei number in about phone/status. But there state invalid imei. I can use internet mobile network, but not phone call. Any solution sir? Please.
ReplyDeletestock ROM ?
DeleteHey mtk hacker , i flashed a custom rom and the radio in engineer mode is turned off and sim is not detected ..any solution , pls
ReplyDeletereplace /etc/firmware,security,bluetooth,wifi
DeleteThanks for reply mtk hacker...but I am confused ..should I replace this /etc... With the folder of working ROM in which Sim is detected ? Or something else
Deleteobviously from your stock rom to port rom
DeleteIm having the stock rom but from where do i get that etc/firmware of the stock rom.
DeleteThe stock rom is updatable only from sp flash tools.
And after flashing the stock rom the same problem is coming of no network.But sim card is detected.
do a format+download all in sp flash tool
DeleteFormat except bootloader ?
DeleteOr format all + download ?
DeleteDone format all+ download.. Flashed with stock rom and unrooted again.. But again the same problem. Sim detected and cross on network bar..signal not coming.. What to do now ?
Deletein dialer dial *#06# what is the output
DeleteFirst it is showing Invalid Imei thn from engineering mode i put the imei back using mobileuncle mtk tools. Again no signal.
Deletethen you have lost your IMEI permanently
DeleteIs there any way to get it back ?
Deletethere are some tools out there in google which claim to resotre IMEI but I haven't tested them. So please google, other than that I am sorry to say I cannot do help you
DeleteNo problem sir.
DeleteThanks it really work
ReplyDeleteenjoy, consider clicking on ads to support my work
DeleteMTK Hacker please help to fix may Lenovo A536. Invalid IMEI.
DeleteHey brO, previously I tried installing TWRP RECOVERY in my MT6572 device but after flashing it I lost my IMEI. Although I had made NVRAM backup with MTK DROID TOOLS but it won't restore my IMEI. Then I manually copied original nvram folder and pasted it in my rom but it also did not work. Then I flashed stock rom through CWM but still no luck. Then I tried Flashing stock ROM with SP FLASH TOOLS but it is stucked after pressing download button! I installed proper drivers, removed battery then connected my mobile! So, what I'm supposed to do?
ReplyDeleteAny Help would be highly appreciated :)
you need to press download first, remove battery from device then place the battery again but do not turn on the phone and then connect it again but do not turn on the phone
DeleteI did as you said but it connected with battery not without battery and only for a second! I saw in DEVICES AND PRINTER that there was a device naming MediaTek PRELOADER USB VCOM port (COM4) appeared for 1 second only. And the Moment SP Flash Tools detected my device a popup came in SP flash tools saying """PMT changed, it must be downloaded!""" I don't know what it means! Maybe driver is not properly installed! But what should I do if drivers specifically for my device are not available! I've already installed many drivers for MTK in my PC but they are not specifically for my device.. My Device is GFIVE BRAVO A5 (MT6572)..
DeletePlzzzz help me! I'm unable to find drivers! Tried Miracle Box too but it also won't recognize my device :( Nothing can be done! Only you(MTK HACKER) are my last hope :(
the partitions in your device have been changed. You must format your whole device and flash your entire ROM again
DeleteIn SP Flash tool instead Download Only select format + download
i have my flashable stock rom, does it have a scatter file inside? I accidentally formatted mmcblck04 wrong path lead to no signal/ imei= null , help please
ReplyDeleteI don't have any scatter file , or any just my flashable stock rom and ported roms
Deleteit should work but only 60% chances of working. You must find a SP Flashable tool firmware for your device which has scatter file
DeleteWhat do you mean by sp flashable tool firmware?
DeleteHmm ive research , will it work if i will use different phone but same in specs and same chipset? Like mt6582 same as mine and also dual sim?
DeleteNO, unless you want to hard brick your device
DeleteIn my device they dont release its firmware, iive already try to go to their site but they dont have it and also does some research, aw man how am i going to fix this
DeleteI only need this and not the whole firmware? Right? sec_ro or ser_co like i. Need to check this only? Or any solution?
DeleteHey Bro,
ReplyDeleteI've flashed my phone couple of times and also tried the "sec_ro" by SP Flash Tool. But still I can;t get my IMEI back. Could you please help me.
P.S. My phone detects the carrier as well as network. Its a Mtk 6592 chipset.
the guide has 2 methods
DeleteHello air I tried this in my lwnovo s650,but after rebooting my imei is still unknown. This happened after I flashed a custom rom to remove bloatwares
Deleteif you have stock ROM then replace /etc/firmware,wifi,bluetooth,security from stock to the custom ROM you are using
DeleteMy rom is s650_row_s305, I rooted first my phone then remove bloatwares then the just stopped and ita stucked in the reboot phase I flashed a new rom,it succeeded but it said that my imei is invalid and serial number is 0000. I ties the mobile uncle and it did not work, I also tried the mtk and reflaahing rom and it did not work,pls help my husband is using the phone if he discovers hea gonna be angry
DeleteHow?
Deletedo you have backup of your stock ROM ? if yes restore it
DeleteSadly I don't :'(
Deletethere is no other way then. Find stock ROM for your device online
DeleteThen I have to reflaahing it again?
Deleteyes, you must find your stock ROM and flash again
DeleteI will try again and I let you know what happened. Thanks anyway for trying to help. Much appreciated
Deletemy phone doesn't detect any sim also no imei only blisspop rom detect's sim but new imei
ReplyDeleteother roms doesn't detects & no imei
follow the Q/A post for lollipop there is a fix already
Deleteyeah i did also flashed stock rom but no luck no imei & no sim detection
DeleteMTK Hacker please help me to fix my Lenovo A536. Invalid IMEI. I tried MobileUncle but it doesnt work.TY
ReplyDeletedid you follow above steps
DeleteI've did format all + download with mediatek SP flash tool v5.1532.00 on a Lenovo A880, after that IMEI is gone, i've followed the MTK Droid Root & Tools v2.5.3 replace both IMEI1 IMEI2 but still nothing, then followed sec_ro download with SP flash tool, this time get => TOOL DL image Fail! once power on the phone.
ReplyDeleteu can whatsapps me at +601110707687
Nvm, using MTK Droid Root & Tools, after ROOT it, then IMEI/VRAM it, then reboot. it works now.
Deletemkt tool not show imei2 and IMEI/VRAM is not highlighted where to click. help me
ReplyDeleteunsupported device
Deletego to recovery mode and try
DeletePossible to do this with a HTC e9+?
ReplyDeletePossible to do this with a HTC e9+?
ReplyDeleteonly for MTK devices
Deletehow to get invalid imei , my internal memory deleted during repartition of internal memory
ReplyDeleteI could add my desired IMEI (which were my 2sim IMEI codes and one for each seem). everything is ok except for when I factory reset, the IMEI resets to invalid value. how to make it permanent?
ReplyDeleteare you not using the IMEI which your device came with ? It is illegal to use fake IMEI
Deleteyes, i used this app to recover my original IMEI. after flashing the rom IMEI was something like this : 13579246... it was clear that this was fake and i used this app to take my phone to previous status and i know fake IMEIs are fake. there is a weird fact that although my IMEI was fake but i could call and send/receive sms messages regularly! so is there anyway for me to make this change permanent?
Deletesry for repeated cm. i wanted to edit previous but I couldn't:
ReplyDeleteEdit:
I could add my desired IMEI codes (which were my 2sim IMEI codes and one for each sim). now I have set my IMEI and everything is ok except for when I factory reset, the IMEI resets to that previous invalid value. how to make it permanent which factory reset doesn't reset it too?
sorry, I do not support using fake IMEI's
Deleteno i do not want to make a fake IMEI. I flashed my phone because of some malfunctioning and constant force closes, because y511 is a dual sim smartphone, after flash completed I saw both IMEIs are set to the same value like this: sim1: 135790246811202 and sim2: 135790246811202 which are clearly fake IMEIs (if you want i can send you pictures of them to see i'm not doing something illegal!) and are not the same as what is printed at back of my phone on the label under the battery! thought these are fake ones i can regularly receive or dial calls without any problems. but using your MTK Droid I could set back my IMEIs to what was before flashing the rom, and everything is ok now. I am not doing an illegal thing, just i set them to what they were. and the only problem is when i factory reset the IMEIs switch back to that fake numbers: 135790246811202! i just wanted you to help me overcome that. but it seems you consider recovering the original IMEI as illegal job. ok np. I send my phone to trash. thanks for your support and reply man!
Deletesir,
ReplyDeletei lost my imei number while flash my phone, now i have my imei number in the box but how to apply my imei number on my phone ?
i see the all tutorial but it dosent work (my device is mtk) so can u help me this problem...
reflash stock ROM via SP Flash Tool
Deletethank you
ReplyDeleteAnd hecker pto please help... and me on gmail... i awaited your reply... thank u
ReplyDeleteI also use mobile uncle tool.. in my engearing mode.. cds in formation and radio option not available or appear how to solve
ReplyDeleteman! my mtk droid tools cant detect my phone? how can i make it detected?
ReplyDeleteinstall proper drivers, pdanet+
Deletethanks it really worked for me! :)
ReplyDelete